FREE SHIPPING ON ACCESSORIES ORDERS OVER £199. FREE SHIPPING ON FLOORING ORDERS OVER £500! *Except Junckers Flooring and Decking

Loba WS 2K Fusion Lacquer Matt 5L

Waterborne 2-Component polyurethane finish for wooden floors. For extremely heavy wear. Elastic, excellent chemical and abrasion resistance.

£80.00 each
In stock

Description

LACQUER WITH AN EXTREMELY GOOD FINAL HARDNESS

Waterborne 2-Component polyurethane finish for wooden floors. For extremely heavy wear. Elastic, excellent chemical and abrasion resistance.

  • Simple and safe application
  • Excellent wear resistance
  • Good price/performance ratio
  • Consumption: 5 KG for 40-50 m²
  • Packaging (article nr.): 5 KG MATT (118330)

Range of use: Suitable for parquet, wood and cork flooring. Also for the surface treatment of the cementitious leveling compound WAKOL Z 615.  

HOW DO I APPLY LOBADUR® WS 2K FUSION, 2 COMPONENT VARNISH?

LOBADUR® WS 2K Fusion is a waterborne 2-component polyurethane finish for wooden floors. For extremely heavy wear. Elastic, excellent chemical and abrasion resistance. Full product information can be found here, but for your convenience, please be advised as follows:Lobadur_2k_fusion

  • We recommend firstly applying a prime coat – EasyPrime or PrimaSeal Plus
  • Shake product, add hardener to base at a ratio of 10 : 1 and then shake to mix. For mixing smaller quantities, use the LOBATOOL® Mixing Container or a scale to weigh out the components.
  • Usable up to 2 hours after mixing.
  • The surface must be sanded properly, wood moisture content max. 12%
  • The floor must be dry and free from any old coatings, oil, grease, wax, silicone, sanding dust and other contaminants.
  • Room temperature +15°C to +25°C, relative humidity 40% to 75%, material temperature +18°C to +25°C.
  • Ensure working areas are adequately ventilated.
  • Transfer material to a LOBATOOL® Varnish Bucket before applying.
  • Shake the contents well.
  • Observe the general and, if available, the product-specific health and safety instructions. More specific information relating to GISCODE can be found in the usage instructions
  • The product is supplied ready for use and must not be diluted!

APPLICATION TOOL/APPLICATION RATE

  • LOBATOOL® roller Deluxe 120 / 100-120 ml(g)/m² = 8-10m²/l(kg)
  • LOBATOOL® roller Microfaser 100-120 / 80-100 ml(g)/m² = 10-12m²/l(kg)

INTERMEDIATE SANDING

  • Able to recoat without intermediate sanding within the first 24 hours. After this time, an intermediate sanding is necessary.
  • An intermediate sanding before the last application will achieve a more even finish.
  • Use LOBATOOL® Perforated Pad P120 or finer, alternatively Sanding Net P120 or finer.
  • Carefully remove dust before overcoating. Drying time
  • Earliest possible recoating after 4-6 hours.
  • Careful use possible after 4-6 hours.
  • Earliest possible intermediate sanding after 8-10 hours.
  • Light use after 24 hours.
  • Full use and covering possible after 5 days.

Specification:

More Information
Product name 118330
Weight KG 5.0000
Accessory type Lacquers & Oils

Download

View the Manufacturer's guide for the best care advice about.

Technical data sheet Safety Data Sheet
Write Your Own Review
You're reviewing:Loba WS 2K Fusion Lacquer Matt 5L
Ask a Question
To Top