Priming and finishing oil for wooden floors and table-/worktops.

Rustic Oil Clear can be used in combination with Rustic Oil Colour.

If you like the appearance of oil, but want the advantages of a lacquered surface, then you can combine Junckers Rustic Oils with Junckers HP Commercial lacquer. 

For professional and private use.

PRODUCT DESCRIPTION

Product: Hardening urethane oil in paraffinic solvent.

Package sizes: Clear: 2½ L

Appearance: A clear oil provides the wood with a deep, warm glow. 

Risk of self-ignition: Cloths etc. used to apply the product can self-ignite. Place used cloths in an airtight and non-flammable container (e.g. a jam jar or a metal can with a lid). Dispose of in accordance with national waste regulations.

TECHNICAL DATA

Coverage per coat: Light wood species like beech, ash, oak and pine: 12-15 m² per litre / 130-160 sq. ft. per litre (490-600 sq. ft. per gallon).

Exotic wood species like nyatoh and merbau: 20-30 m² per litre / 215-320 sq. ft. per litre (810-1200 sq. ft. per gallon).

Before application: Shake/stir well before use.

Application tools: Cloth, brush, roller, lambswool applicator, a white nylon scouring pad. Use a buffing machine on floors.

Substrate temperature: Minimum 15 °C.

Dilution: Not recommended.

Drying time at 20 °C and 50 % RH: 16-24 hours before applying the finishing oil. 

Ready for use 24 hours after the finishing treatment. Fully cured after 72 hours. Do not cover the surface by i.e. carpets or rugs before the oil is fully cured.

Cleaning of tools: White spirit.

Storage: Lasts for 2 years if unopened and stored at 20 °C. Once opened the oil will start to form a skin and may harden in the can.

Domestic and commercial areas: 2 coats of Rustic Oil, applied wet in wet + 1 coat of Rustic Oil. Alternative to the finishing coat of oil: 2 coats of HP Commercial.

Worktops: 2 coats of Rustic Oil + 2 thin coats of Rustic Oil.