A solvent-free, non-staining acrylic-based adhesive
designed to provide a permanently tacky film when dry,
to allow the removal and replacement of carpet tiles
when required.

Some application examples:

Use Ultrabond Eco Tack for:
• bonding carpet tiles backed with PVC, polypropylene,
fibre backed bitumen and other polymer backings
onto concrete, cementitious screeds, raised access
floor panels, asphalt, terrazzo, chipboard, plywood,
smoothing compounds and some existing floor
coverings.

Ultrabond Eco Tack is also suitable for use over
underfloor heating systems (surface temperature must
not exceed British Standard recommendations). The
heating should be switched off at least 48 hours before
and after the installation of floor covering.

In areas subject to excessive variations of temperature,
and floor coverings not completely dimensionally stable,
care should be taken as movement may occur causing
gaping.

CONSUMPTION: approx. 70m2 per 5kg.

APPLICATION: by roller.