It is important that the product, the room and the floor are at a temperature between 15°C and 30°C and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. The floor must be free of dirt, grease, wax and sanding residue. Previously treated floors should be sanded down to bare wood with grain 120-150. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth. Hardwax Oil Swift is ready for use.

Hardwax Oil Swift should be stirred thoroughly before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.

Apply a thin layer of oil using a short-bristled paint roller (3-4 mm) or similar, along the grain of the wood. Distribute the oil thoroughly.

Leave the floor to dry for 4-5 hours. Drying time will vary by temperature, humidity and application quantity. Lower temperatures and/or higher humidity can extend drying time.

Repeat the treatment within 24 hours if another coat of oil is required. A single coat of oil is normally enough for previously-oiled surfaces.

Regular cleaning: WOCA Natural Soap or WOCA Oil Refreshing Soap. Regular maintenance: WOCA Oil Care. Re-oil with Hardwax Oil Swift or WOCA Maintenance Gel as required.